Meter with colour bargraf, with current-voltage input, 2 or 4 relay (or OC type) outputs and 1 analogue output, according to the customer selection: active current output, passive isolated current output or active voltage output. The meter can be configured with the local keyboard or free S-Config software via the RS-485 communication port.
The SRL-49 meter is designed for measuring of typical current or voltage signals. The readout is presented simultaneously on a four-decade LED
display and a 20-point, two-colour bargraph covering the full measuring range. Thanks to wide range of characteristic curves (linear, square
root, quadratic, user-defined and volume characteristic for cylindrical tanks) the meters may be used in various process control systems. The
24V DC / 100 mA output is designed to supply measuring transducers, and the RS-485 port enables data transmission in production process
monitoring systems. The REL / OC control outputs can adjust the level of measured signal and are controlled according to one or two threshold
values. Moreover, the meter can be equipped with analogue outputs, according to the customer selection: active current output, passive
isolated current output or active voltage output. The meter can be configured with the local keyboard or free S-Config software via the RS-485
communication port.
Features
- process meter with bargraph
- inputs: 0/4-20 mA, 0/1-5V, 0/2-10V
- 0, 2 or 4 REL / OC outputs
- analogue output: active or passive power supply output: 24V DC
- RS-485 / Modbus RTU
- signal peak value detection
- free configuration software S-Config
