To configure the STT-26 submersible temperature transmitter, follow these steps:
1. Download the USB Speedlink software from the provided link: USB Speedlink Software
2. After downloading, extract the files from the zip folder.
3. Locate the executable file and run it.
4. The software will establish a connection with the USB Config MKII interface device.
5. Ensure that the USB Config MKII interface device is connected to the computer via the com port.
6. Once the connection is established, you can begin configuring the STT-26 submersible temperature transmitter.
For assistance with the installation, you can refer to the USB Speedlink Installation Guide, which can be downloaded here: USB Speedlink Installation Guide