Table of Contents
The “G” in a G1/4″ thread refers to British Standard Pipe (BSP) threads, specifically the cylindrical type. This designation indicates that both the internal and external threads are parallel rather than tapered, which is typical of other thread types like R or NPT (tapered) threads. The G1/4″ thread is standardized under DIN ISO 228 and is commonly used in plumbing and various industrial applications whereas the DIN 3852 and EN 837 versions are common in sensors and instrumentation applications.
Key Characteristics of G1/4″ Threads: #
- Cylindrical Design: Both male and female threads are cylindrical, meaning they do not taper. This requires additional sealing methods, such as O-rings or gaskets, to ensure a leak-proof connection
- Thread Dimensions: The “1/4″ in G1/4″ does not correspond directly to the outer diameter of the pipe; instead, it indicates a nominal size. For G1/4”, the actual major diameter is approximately 13.16 mm (0.518 inches)
- Applications: Commonly used in plumbing, heating, pneumatic & hydraulic systems, G threads are designed for pressure-tight connections but require sealing compounds since they do not seal by themselves
Comparison with Other Thread Types: #
| Thread Type | Design | Sealing Method | Standard |
|---|---|---|---|
| G (BSP) | Cylindrical | O-rings/gaskets | DIN ISO 228 |
| R (BSPT) | Tapered | Self-sealing | DIN ISO 7 |
| NPT | Tapered | Self-sealing | ANSI B1.20.1 |
In summary, the “G” in G1/4″ signifies a specific type of cylindrical pipe thread used widely in various applications, characterized by its need for external sealing methods.