PRODUCT CATEGORIES:
Our range of Wireless & Telemetry devices make monitoring and analysing the data from your sensors effortless. The Stork Solutions range makes cable replacement systems, interfacing, logging results and transmitting to the cloud simple and affordable with ultra-low power consumption.
Wireless and telemetry devices are a practical way to monitor sensors when cabling is difficult, expensive, or simply not possible. Stork’s wireless and telemetry range is built around cable replacement, simple interfacing, reliable logging, and cloud transmission, while keeping power consumption low for remote deployments.
This category sits within the wider instrumentation portfolio and is commonly paired with measurement hardware across pressure measurement, level measurement, and temperature measurement.
Many industrial sites already use 4-20 mA loops for pressure, level, and process monitoring. Wireless transmitters can replace long cable runs while keeping the same signal structure at the receiving end.
Two options designed for straightforward integration into this style of installation include:
If your sensor is a pressure device and you want to move directly into a wireless pressure solution, the IWPT wireless pressure transmitter is a dedicated option built for remote measurement and integration with the IWR receiver ecosystem.
Wireless sensor networks still need a practical way to bring data into a local system, a logger, or into a cloud platform. The Stork range includes receivers and gateways designed to handle that handoff cleanly.
For example, at the system edge, the ECHO-IoT remote monitoring gateway is designed to accept inputs from large deployments, including up to 128 IWT industrial wireless transmitters, as well as supporting analogue inputs such as 4-20 mA or 0-10 V. This makes it easier to combine wireless sensors with conventional wired transmitters in the same monitoring architecture.
Where you need more than point to point transmission, a remote monitoring platform can simplify the full workflow from sensor input through to logging and onward transmission.
The ECHO4 remote monitoring system is positioned to help with interfacing, logging, and sending data to the cloud, which is particularly useful in remote locations where power and connectivity are constrained.
If your requirement is primarily recording and analysis rather than transmission, you may also want to connect this page naturally to the data loggers range, which covers everything from portable units through to multichannel logger and controller systems.
Wireless is typically one part of the end to end measurement chain:
If you tell me the most common use case for this page, for example remote pressure monitoring, environmental telemetry, or retrofit of 4-20 mA loops, I can tighten the copy further so the internal links reflect the primary buyer journey.
Thank you for visiting Stork Solutions.
Please fill in the form and send through your enquiry. If you are interested in multiple products then please add the details into the message section.
We look forward to receiving your enquiry.
Thank you
Stork Solutions