T8999 Leak Tester Connectivity
The connecting “short form” attached to the manuals provides connection to an external vacuum pump (C.2.3), not provided.
A special “flow sensor deviation” parameter allows a continuous comparison of the two sensors of flow measurement(can be excluded by setting the threshold to 0%)
in order to comply in Run-Time mode with the validation of C.2.5.5.
In addition to what is required in the legislation, the instrumentation is able to measure both differential pressures (loss of pressure (mouthpiece head) and relative pressure (mouthpiece head) both for perform tests indiscriminately at a controlled flow rate that at constant pressure.
Complete the features all the options already present in the T9000 range as ISO, LAN traceability, Wifi, BLE , communication ports, AUX signals as more in detail indicated in the user manual.
- USB Key
- RS232, RS4845, Can, TTY
- Ethernet TCP/IP and auxiliary connectors
Automatic Procedures
The T9731- EN 14683 is able to perform in the following way fully automatic all procedures that requires regulation:
– “Breathability” tests, setting the test in mode “PRESSURE DROP” as per Procedure C.4;
– “Tool validation” tests (C.2.5.5) Part 1 of Mass-Flow Relevance
– “Equipment validation” tests (C.2.5.5) part 2 of Mass-Flow Zero Flow Seal
Advanced Interface
We thought the T9000 series as the ultimate expression of technology in measuring systems, with an advanced interface that is useful for analysis and studies in the prototyping or pre-series phase, as well as for the production line testing. The large 7″ colour display, embedded in a panel in capacitive glass, allows total interaction in the internal and main-screen menus, and the evidence archive “smart” contains daily, monthly and specific for each test program, so as to maintain controlled the level of quality of your products.
- Easy to clean
- User friendly interface
- Use in sectors at 360°
