Home / Instrumentation / KL 2 Plastic Terminal Box
The KL 2 is an ABS plastic terminal box designed for the professional electrical connection of submersible level transmitters. Serving as a lightweight and cost-effective alternative to aluminium terminal boxes, it provides secure field termination alongside integrated atmospheric pressure compensation and optional overvoltage protection.
An integrated pressure balance element equipped with a PTFE filter equalises changes in atmospheric reference pressure, enabling the use of standard supply-side cables without internal ventilation capillary tubes. Vertical terminal clamps simplify installation and internal wiring within a durable, grey IP66-rated housing.
The KL 2 delivers a cost-effective, durable connection hub for 2-wire, 4–20 mA submersible level and pressure transmitters. Constructed from robust grey ABS plastic and sealed to IP66 standards, it provides reliable environmental protection in wet and demanding industrial conditions.
To ensure high measurement accuracy, an integrated pressure balance element featuring a permeable PTFE filter equalises atmospheric pressure fluctuations. This allows standard, non-vented cabling to be routed from the terminal box back to the control system or instrumentation panel.
The unit is available in standard single-transmitter configurations or a dual-channel variant designed to accommodate two independent 2-wire circuits. Optional integrated surge protection provides reliable suppression against transient voltages with a 10 kA (8/20 µs) discharge capacity.
For safe installation, ensure the transmitter supply voltage matches the connected transmitter specifications and connect all component ground wires securely.
Cost-efficient grey ABS plastic enclosure
Designed for 2-wire 4–20 mA submersible transmitters
IP66 enclosure protection rating
M16 × 1.5 polyamide cable glands with NBR seals
IP68 cable entry rating
Standard cable clamping range of Ø5–10 mm
Integrated pressure balance element with PTFE filter
Eliminates the need for vented capillary tubes in supply cabling
Vertical terminal clamps for solid and stranded conductors up to 2.5 mm²
Lightweight design at approximately 220 g
Optional version for two independent 2-wire circuits
Optional integrated overvoltage protection with 10 kA surge arresters (8/20 µs)
10 Ω series resistance per line on surge-protected variants
Compact footprint for surface or wall mounting
PDF · 947.8 KB
Thank you for visiting Stork Solutions.
Please fill in the form and send through your enquiry. If you are interested in multiple products then please add the details into the message section.
We look forward to receiving your enquiry.
Thank you
Stork Solutions