Instrumentation
See the full product range in this category below:
UPS-HSR USB Pressure Sensor with High Sample Rate Logging
Select your options
USB ready digital pressure sensor for recording pressures with a high speed sample rate of up to 1 kHz to a computer. The UPS-HSR is supplied with a 2m long...
SIAi-8 8x Analogue input to RS485 Modbus converter module
Select your options
Module SIAi-8 allows to measure analog values from 8 current (or voltage)inputs via the RS-485 connection, with speed rate about 10 Hz (everychannel). Measurement results can be internally recalculated due...
PUR-99 Two-step Process Controller with Fuzzy logic and Auto-tune
Select your options
PUR-99 is a simple two step controller (also known as ON-OFF or hysteresis controller) and, at the same time, an advanced PID controller with two control loops (heating / cooling),...
ECHO4 Remote Monitoring System
Select your options
ECHO4 Remote Monitoring System (RMS) is designed to make, what is considered to be a complicated task, of interfacing and reading sensors, logging the results, transmitting to the cloud, a...
CIT 400 process display with contacts and analog output
Select your options
Features 4-digit LED display input signal: 4 ... 20 mA housing variant: front panel or hat rail 2 or 4 limit value relays and 1 alarm relay scalable analog output...
PA440 Field Display for current Loop with contacts
Select your options
Functions► free scalable display► switch mode, hysteresis, parameterizable deceleration of the contacts► no external power supply necessaryProduct characteristics► field display for pressure transmitter with output signal: 4 … 20 mA...
PA430 Plug-on Display for Current Loop with Contacts
Select your options
The PA 430 is a plug on display designed for use with temperature or pressure transmitters which have a 4-20mA or 0-10V output. The PA430 has interface connections suitable for...
DL01 Battery Powered Precision Digital Gauge for Leak Testing
Select your options
The digital pressure gauge DL 01 is a precision device fulfilling highest demands. It was conceived especially for leak testing or pipeline monitoring. In the leakage mode the device shows...
DM01 Battery Powered Precision Digital Gauge
Select your options
The digital pressure gauge DM 01 is a precision device fulfilling highest demands. It was conceived especially for the process monitoring and calibration. The advantage: The DM 01 consists of...
SLS-D Digital submersible level transmitter
Select your options
The SLS series of submersible level transmitters have been developed using an isolated diaphragm silicon piezo-resistive sensing element housed in a robust stainless steel housing. It has an integrated moulded...
SWI-94 Digital weight meter
Select your options
The SWI-94 weight meter is designed for operations with load cells (strain gages) in simple industrial applications not requiring legal metrology approval. The meter is equipped with operating pushbuttons which...
PUR-94 Advanced PID controller
Select your options
PUR-94 is an advanced PID controller with two control loops (heating / cooling), supported by the auto-tuning function and Fuzzy-Logic algorithm. The device has a build-in REL / OC (SSR)...
SRT-147 Large display temperature indicator
Select your options
The SRT-147 meter is equipped with inputs Pt100, Pt500, Pt1000 or thermocouple. Additionally the SRT-147 allows user to select a conversion characteristic of several kinds: linear, square, square root, and...
SRT-L70 DIN rail mount temperature indicator
Select your options
Temperature meter on TS35 strip with inputs Pt100, Pt500, Pt1000, with 3 relay outputs. The SRT-L70 temperature meter has a Pt100/Pt500/Pt1000 input. Measuring range contains temperatures: -100°C÷ +600°C with resolution 0,1°C. The nonlinear sensor...
SRT-77 Digital indicator with setpoint display
Select your options
Temperature meter with 2 displays, with inputs Pt100, Pt500, Pt1000 or thermocouple, with 1 or 2 relay / OC outputs. The version without relay outputs is also available. The SRT-77 temperature...
SRT-N118 Wall mount digital temperature display
Select your options
The SRT-N118 meter is designed for temperature measurements. The device is equipped with one resistance-type Pt100/500/1000 input or thermocouple input which can operate with K, S, J, T, N, R,...
SRT-94 Digital temperature indicator
Select your options
The SRT-94 temperature meter has one input: thermoresistance (Pt100/500/1000) or thermocouple (K, S, J, T, N, R, B, E). Measurement is linearised by the polynomial characteristics. The device with thermocouple...
STN-94 Digital indicator with setpoint display
Select your options
Temperature meter with double display, with inputs Pt100, Pt500, Pt1000, with 1 relay / OC output. The STN-94 meter is designed for temperature measurements and is particularly suitable in applications which...
SRT-73 Digital temperature indicator
Select your options
Temperature meter in a small case with inputs Pt100, Pt500, Pt1000 or thermocouple, with 1 or 2 relay / OC outputs. The version without relay outputs is also available. The...
SWE-73-T Digital panel indicator
Select your options
The low-cost SWE-73-T is a small, simple digital panel indicator, equipped with Pt 100/Pt 500/Pt 1000 type input, with automatic connection recognition (two, three or four wire sensor). The measurement...
SWP-99X Multichannel digital indicator
Select your options
The SWP-99X meter is intended for measuring and presentation of current values from max. 8 measuring channels in 0/4-20 mA, 0/1-5 V, 0/2-10 V standard. Each channel can be individually...
SRP-147 Digital indicator with large display
Select your options
Meter with large display (digits 38 mm), with current-voltage or mV input, with 2 or 4 relay (or OC type) outputs and 1 analogue output, according to the customer selection:...
SRL-49 Bargraph digital indicator
Select your options
Meter with colour bargraf, with current-voltage input, 2 or 4 relay (or OC type) outputs and 1 analogue output, according to the customer selection: active current output, passive isolated current...
SRP-94 / SRP-946 Digital Indicator
Select your options
The SRP-94(6) meter is designed for measuring of typical current or voltage signals. The readouts are presented on well-readable display with standard range of four digits or five/six digits for...
© 2021 storksolutions. Designed by rdkl.co.uk
