We are happy to present the “USB-SDI12-PRO” which is predominantly used for the SLS-D range of SDI-12 submersible level transmitters which also powers the sensor from the USB port and enables communication the Stork DCT SDI-12 “Device Configuration Tool”. This software means you can connect up to 10 x SDI-12 devices to your PC for configuration and data logging purposes which is ideal when you have set up a site and want to test functionality before you turn on and rely on your battery or solar-powered solution.
The Stork DCT Software has the following features:
The Stork DCT Software has the following features:
- Ability to turn density correction on/off which further improves the overall system accuracy of your measurements
- Auto Zero or Zero adjust, ideal for installations where you need to adjust for Local Datum or Ordnance Datum (maOD Newlyn, Cornwall)
- Define the pressure/level and temperature units the device outputs
- Adjust the filter settings and sample rates
- Data log the connected sensors (up to 10 at one time) to the PC/Laptop
- For the more experienced user there is a ‘Calibration Mode’ which can be used to perform annual calibrations on the device