T8999 Leak Tester Connectivity
The new T8999 equipment includes ports for the USB slave, RS232, RS485, Profinet, EtherNet IP and EtherCAT. Assembly may also include an optional Ethernet port and a 26-pole connector with 4 inputs and 8 outputs, which are completely programmable, for interfacing with the external valves, safety barriers, switches, etc…
The front panel has a master USB port assembled on it for connection to a USB key to save the tests conducted, backup/restore parameters and upgrade firmware.
The connection to thermal printers, barcode/data-matrix readers and markers takes place automatically using an internal menu.
- USB Key
- High Power Outputs
- RS232, RS4845, Can, TTY
- Ethernet and auxiliary connector
Double use method
T8999 has a dual use, integrating both the classic absolute decay leak test method and that of leak identification.
The test parameters allow automatic start-up of the leak identification cycle in the event of a rejected piece, making the process semi-automatic.
The sensitivity of the leak detection probe is 1 cc/h, independent of the pressure and the volume being tested.
- 1 cc/h sensitivity
- Semi-automatic programming cycle
Optimised Pneumatic Section
Assembly of the latest generation solenoid valves has enabled a 30% increase in the filling speed compared to the previous model, maintaining reliability unaltered over time. This instrument do not require expensive maintenance in the pneumatic department. Actually, our objective is to make them increasingly reliable and long-lasting.
- Filling speed +30%
- High strength against humidity
- No periodic maintenance
T8999 Design
What appears to be a simple design exercise, in fact hides an in-depth study to make use and understanding as simple as possible.
The front panel is made of a single sheet of tempered glass and aluminium, which makes it extremely easy to clean, making the T8999 suitable for use in the laboratory and on the production line.
- User-friendly interface
- Easy to clean
- Use in sectors at 360°
