Process Control & Pressure Regulation Systems
Accurate, reliable pressure measurement is the foundation of effective process control and pressure regulation. From chemical reactors and pharmaceutical clean rooms to oil refineries and food processing lines, maintaining precise pressure parameters ensures product quality, operational efficiency, and plant safety.
Stork Solutions supplies a comprehensive range of pressure transmitters, electronic pressure switches, and digital sensors purpose-built for process control environments. Our portfolio includes HART®-enabled precision transmitters, IO-Link smart sensors, intelligent electronic switches, and differential pressure instruments — all backed by ATEX/IECEx certification and expert UK-based technical support.
Product Spotlight for Process Control & Pressure Regulation Systems
Why Precision Pressure Measurement Matters in Process Control
Pressure is one of the most critical process variables in industrial operations. Inaccurate readings or slow response times can lead to:
Product quality failures — out-of-spec batches, contamination, or inconsistent output
Safety incidents — overpressure events, equipment damage, or uncontrolled reactions
Energy waste — inefficient compressor or pump operation due to poor regulation
Regulatory non-compliance — failure to meet SIL, ATEX, or industry-specific standards
Modern process control demands instruments that deliver high accuracy, fast response, digital communication, and hazardous area certification as standard.
Precision Process Transmitters with HART® & SIL2
For critical control loops requiring the highest accuracy and functional safety, our precision process transmitters deliver:
XMP i Precision Pressure Transmitter — The flagship process transmitter. HART® 7.0 communication, SIL2 certified to IEC 61508, 400 mbar to 600 bar range with 1:10 turn-down ratio. ≤0.1% FSO accuracy. Ideal for safety-instrumented systems (SIS) and critical control loops in oil & gas, chemical, and pharmaceutical plants.
XMP ci Process Pressure Transmitter — HART®-enabled with a robust ceramic measuring cell for outstanding long-term stability. 160 mbar to 20 bar range, 1:5 turn-down. Excellent chemical resistance makes it ideal for aggressive media in chemical processing and water treatment.
DMP 331 P i Precision Pressure Transmitter — Digital precision transmitter for low-pressure process control applications. ATEX/IECEx approved for hazardous areas.
Standard Industrial Pressure Transmitters
Reliable, cost-effective transmitters for general process monitoring and regulation across a wide range of industrial applications:
DMK 331 Industrial Pressure Transmitter — Ceramic sensor technology, up to 400 bar. ATEX/IECEx certified. Proven reliability for general process monitoring in hazardous and non-hazardous environments.
DMP 331 Industrial Pressure Transmitter — Optimised for low-pressure regulation up to 60 bar. Stainless steel wetted parts for broad media compatibility.
DMP 333 Industrial Pressure Transmitter — Designed for high dynamic loads up to 600 bar. Robust construction for demanding process environments with pressure spikes and pulsation.
DMP 335 Industrial Pressure Transmitter — Versatile general-purpose transmitter suitable for a wide range of process control applications.
DMP 339 Industrial Pressure Transmitter — Compact design for space-constrained installations without compromising measurement performance.
Fast Response Transmitters for Dynamic Process Control
When millisecond response times are critical for process stability:
DMP 320 Precision Pressure Transmitter — ≤0.5 ms response time with 10 kHz sampling rate. 100 mbar to 600 bar range. Purpose-built for dynamic process control, test benches, hydraulic systems, and applications where rapid pressure changes must be captured and responded to in real time.
High-Pressure Process Transmitters
For processes operating at extreme pressures up to 2,200 bar:
DMP 334 Industrial Pressure Transmitter — Rated to 2,200 bar for high-pressure process control in hydraulic systems, injection moulding, and high-pressure chemical processes. ATEX/IECEx certified.
DMP 334 i Precision Pressure Transmitter — Digital precision version rated to 2,200 bar. Enhanced accuracy for critical high-pressure control loops.
Digital & IO-Link Transmitters for Smart Process Control
Industry 4.0-ready transmitters with digital communication for seamless integration into modern control architectures:
DCT 531 i Precision Pressure Transmitter — RS485 Modbus RTU interface, up to 400 bar. Enables direct digital communication with PLCs and SCADA systems, eliminating analogue signal degradation.
DCT 533 Industrial Pressure Transmitter — IO-Link V1.1 interface, up to 600 bar. Plug-and-play digital integration with automatic device identification and parameterisation.
DCT 533 P Industrial Pressure Transmitter — IO-Link with hygienic flush diaphragm design for food, beverage, and pharmaceutical process control.
DCT 563 Industrial Pressure Transmitter — IO-Link, 600 mbar to 600 bar. Designed for aggressive media with excellent chemical resistance.
Differential Pressure Transmitters for Flow & Filter Monitoring
Differential pressure measurement is essential for flow monitoring, filter condition monitoring, and level measurement in process control:
DMD 331 Differential Pressure Transmitter — 20 mbar to 16 bar differential range. Reliable monitoring of filter condition, flow rates, and tank levels across liquids and gases.
DPT 100 Differential Pressure Transmitter — 10 mbar to 20 bar. Purpose-built for process industry applications including flow measurement and filter monitoring.
DPT 200 Differential Pressure Transmitter — HART® communication, 1 mbar to 20 bar. The most sensitive differential pressure transmitter in the range, ideal for critical flow measurement and advanced process control loops.
Intelligent Electronic Pressure Switches
Programmable pressure switches that combine switching, display, and monitoring functions for process protection and alarm:
DS 201 Electronic Pressure Switch — ATEX/IECEx certified, configurable PNP output, up to 600 bar. Compact and reliable for hazardous area process protection.
DS 400 Intelligent Electronic Pressure Switch — 4-digit LED display, programmable switch points, up to 600 bar. Combines pressure measurement, display, and switching in a single instrument.
DS 400 P Intelligent Electronic Pressure Switch — Hygienic stainless steel design, 100 mbar to 40 bar. For food, beverage, and pharmaceutical process protection.
DS 401 Intelligent Electronic Pressure Switch — 400 mbar to 600 bar. Intelligent switching with configurable hysteresis and delay for stable process control.
Certifications & Compliance
All Stork Solutions process control instruments are manufactured to the highest international standards:
ATEX & IECEx — Certified for use in explosive atmospheres (Zone 0, 1, 2)
SIL2 (IEC 61508) — Functional safety for safety-instrumented systems
HART® 7.0 — Industry-standard digital communication protocol
IO-Link V1.1 — Smart sensor integration for Industry 4.0
Modbus RTU (RS485) — Direct digital communication with PLCs and SCADA
IP65 / IP67 / IP69K — Ingress protection for harsh environments
CE, RoHS — Full European regulatory compliance
3.1 Material Certificates — Available on request